Free UK Delivery on All Orders Over £49

Supplying Koi & Pond Enthusiasts With Confidence

1-2 Day UK Delivery From £3.79

Free when you spend over £49

Products Sourced Within The UK

99% of Products Manufactured In the UK

Expert Support & Guidance

Email: enquiries@eco-filtration.co.uk

Large Strainer/Cage from 110mm/4” Joining Spigot

£24.99

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Mike Goldacre
Well constructed strainer

Bought the strainer to replace existing unit which had become distorted and was restricting flow to the pump. Very well constructed and blends very well into pond against the liner, if required the nuts can be undone to clear any internal debris. The surface area of the strainer has little impact on flow and have had to turn pump flow down to prevent filter overflowing. The only slight downside (hence giving it four stars) smaller leaves can get through on the corners where the gaps are slightly larger but this will only impact with leaves like bamboo which have not been collected by skimmer.
A very effective and efficient strainer for the price, arrived well packaged and in good time. Recommended and will use again for pond parts and filters

Description

Large Strainer/Cage from 110mm/4” Joining Spigot

Strainers are ideal for any inlet or outlet pipe work on filters. The strainer will stop large debris from going into the actual filter. The strainer has been designed to be attached to any 110mm/4” fitting; the strainer cage is manufactured with a joining spigot of 110mm OD. All 110mm/4” fittings such as bends and tees will mount directly onto the strainer itself (if you require any further information on sizing please look at our pipe identification chart supplied)

The strainer can also prevent fish from disappearing through the pipework.

This strainer is also perfect for using in-between ports/inlets in your filter. Stopping any media from leaving its intended chamber.

The strainer has been designed to be cleaned/maintained easily. Simply remove the 4 threaded nuts from the top plate of the strainer; this will give access to the inside.

A product that is produced to a high quality and one that never disappoints

Strainer/Cage Size: H-155mm    W-200mm     L-240mm

Please Note: This fitting is solvent weld

 

Additional information

Weight 0.726 kg

You May Also Like These Related Products: