Description

Large Strainer/Cage, 110mm Swept Bend and 110mm Spigot Threaded Tank Connector Kit

This kit is supplied with a 110mm swept bend and 110mm Spigot Threaded Tank Connector. A spigot tank connector has been specially designed to fit internally into 110mm fittings. This makes for a more compact and tidy job. This kit has been purposely designed for use in filters. This handy little kit is everything you need for getting from one filter chamber to the next

The strainer will stop large debris from going into the actual filter. The strainer has been designed to be attached to any 110mm/4” fitting; the strainer cage is manufactured with a joining spigot of 110mm ID. (if you require any further information on sizing please look at our pipe identification chart supplied)

The strainer can also prevent fish from disappearing through the pipework.

This strainer is also perfect for using in-between ports/inlets in your filter. Stopping any media from leaving its intended chamber.

The strainer has been designed to be cleaned/maintained easily. Simply remove the 4 threaded nuts from the top plate of the strainer; this will give access to the inside

.Strainer/Cage Size: H-155mm    W-200mm     L-240mm

A product that is produced to a high quality and one that never disappoints

Please Note: This fitting is solvent weld