Description

Double Sided 110mm/4″ Threaded Tank Connector (Short)

This product is perfect for joining chambers/tanks together when  4″/110mm is required

This Product measures 50mm between the flanged rings on both the threaded tank connectors (50mm gap between chambers/tanks)

This threaded tank connector has been designed to work in conjunction with 110mm solvent weld pipe (please view our pipe identification chart for finding your correct pipe size)

Supplied is the double-threaded tank connector body, back nut x 2, and sealing washer x 2

Threaded tank connectors are quick and easy to use, making them perfect for any job, great for inlet/outlet ports between chambers

The threaded tank connector has been designed like a socket/joining bush, allowing for ridged pipe to be solvent welded on either side of the connector. This is perfect if you wanted to join onto the inside/outside of a tank/filter system

The threaded tank connectors are solvent weld; always use a non-toxic sealant when fitting this product

Please view the threaded tank connector chart for more information on the dimensions

Please Read before Purchasing

Before purchasing any threaded tank connector makes sure you have doubled check the Outside diameter of your ridged pipe. In some case the pipe can be mislabeled and can be miss leading

Please note the size of the threaded tank connector is gauge on what DIA(mm) ridged pipe it works with. For example, a 50mm threaded tank connector will fit 50mm OD of ridged pipe work. The size of the thread has no relevance to the size of tank connector that is being advertised