Description

Double Removable Strainer/Cage from 2″/56mm rigid pipe (50mm Domestic Waste-Pipe)

Strainers are ideal for any inlet or outlet pipe work on filters. The strainer will stop large debris from going into the actual filter. The strainer has been designed to be attached to any 2”/56mm rigid pipe, with the addition of a removable nut. This allows for a secure/tight fit but is easy to clean by just unthreading the nut

The double strainer was designed for larger ponds/filter systems where a larger flow of water is required.

This kit has not been assembled allowing you to build it in different configurations tailor made to your filter/pond setup.

The strainer can also prevent fish from disappearing through the pipework.

This strainer is also perfect for using in-between ports/inlets in your filter. Stopping any media from leaving its intended chamber.

The addition of a 2”/56mm threaded tank connect and a 2”/56mm joiner allows you to secure the strainer to your tank or between bays in your filter

This strainer will fit any 2”/56mm (OD) pipework or fitting (if you require any further information on sizing please  look at our pipe identification chart supplied)

if you require any parts please look at our product archive

A product that is produced to a high quality and one that never disappoints

What is supplied in the kit?

2 x Strainer Cones
2 x threaded Body
2 x threaded Nut
2 x 2”/56mm Bend
1 x 2”/56mm Tee
5 x 2”/56mm – 2”/56mm internal joiners