Description

Large Round Strainer/Cage from 110mm/4” Joining Spigot

Strainers are ideal for any inlet or outlet pipe work on filters. The strainer will stop large debris from going into the actual filter. The strainer has been designed to be attached to any 110mm/4” fitting; the strainer cage is manufactured with a joining spigot of 110mm ID.  (if you require any further information on sizing please look at our pipe identification chart supplied)

The joining sock has an OD of 110mm on one side and on the other has an ID of 110mm, this can be reversed if the application of 110mm OD pipe is required

The strainer can also prevent fish from disappearing through the pipework.

This strainer is also perfect for using in-between ports/inlets in your filter. Stopping any media from leaving its intended chamber.

The strainer has been designed to be cleaned/maintained easily. Simply remove the 4 threaded nuts from the top plate of the strainer; this will give access to the inside.

A product that is produced to a high quality and one that never disappoints

Strainer/Cage Size: H-160mm    Dia – 280mm

Please Note: This fitting is solvent weld